Testing of electrical protective equipment

Stationary high-voltage stand SVS-100 (hereinafter - the "stand") is intended for testing the insulation of protective equipment (insulating rods, rubber boots, gloves, power tools, etc.), insulation of power cables and solid dielectrics with variable high voltage of industrial frequency, regulated within 0 - 100kV.

Stationary high-voltage stand SVS-50 (hereinafter referred to as the "stand") is intended for testing the insulation of protective equipment (insulating rods, rubber boots, gloves, power tools, etc.), power cables and solid dielectrics with variable high voltage of industrial frequency, regulated in within 0 - 50kV.

The stand is designed for operation under a canopy or indoors at operating air temperatures from plus 5 ° C to plus 40 ° C, relative humidity 80% at a temperature of plus 20 ° C and atmospheric pressure 84.0 - 106.7 kPa (630 - 800 mmHg.).

To work with the device, two operators are required who have permission to work with electrical installations with voltages above 1000 V. 

• testing of insulation of protective equipment (rubber boots, gloves, power tools, etc.) with alternating high voltage of industrial frequency, adjustable within 0 - 50 kV.
• testing the insulation of power cables and solid dielectrics with a rectified electric voltage up to 60 kV, as well as for testing solid dielectrics with a sinusoidal electric voltage of 50 Hz.
• determination of the breakdown voltage of liquid dielectrics with a voltage of 50 Hz up to 50 kV. (according to GOST 6581-75)
• Measurement of leakage currents of tested objects (protective equipment, arresters, etc.)

• stationary,
• figurative.

To work with the device, two operators are required who have permission to work with electrical installations with voltages above 1000 V.